The DPR AD1211-S0 is a rewinder and unwinder in one and features a tension arm for steady winding action.
AD1211-S0 Label Rewinder / Unwinder
Printer Category: Label Rewinder
Technology: Full Size Label Rewinder
Label Type: Die Cut Rolls
The DPR AD1211-S0 Label Rewinder can handle labels up to 4.72” (120mm), 5” (127mm) and 6.85” (174mm) wide and rewind rolls with a diameter up to 6.7” (170mm), 10” (250mm) and 11.81” (300mm) onto an adjustable core holder from 1.57” (76mm) up to 4.64” (118mm). The AD1211-S0 is equipped with an external auto-switching 100/240VAC - 2.5A at 24V power supply and an electronic circuit controls the functions. When the roll of labels runs out, the rewinder stops by uttering an acoustic signal. The ability to adjust the direction of rotation, clockwise or counterclockwise, allows to rewind the labels face in or face out.
The DPR AD1211-S0 Label Rewinder are constructed with powder coated metal leading to a long lifespan.
The tension arm adjusts the speed of rotation. When the arm is down, the rewinder will rotate at full speed. Whereas, when the tension arm is up, the rewinder is idle, which blocks the motor’s rotation when the printer stops.
- Label Width: up to 5"
- Roll Diameter up to 10” (250mm)
- Speed 225 rpm - Label Width up to 5” (127mm)
- Adjustable Core Holder from 1.57” up to 4.64” (40-118mm)